< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=731069931498933&ev=PageView&noscript=1"/>
banner

OUR Knowledge

Home > Knowledge

Talking about the adjustment method of floor spring

Oct 19, 2021

The floor spring is a hydraulic door closer, but the device that compresses the spring is a worm gear instead of a rack and pinion. Because the worm wheel can rotate forward and backward, the floor spring can be used for two-way opening doors, while the door closer can only be used for one-way opening doors. The technical key of the floor spring is the bearing seat at the lower part of the main shaft, which determines the load-bearing grade of the floor spring. How to adjust the floor spring? Below, the floor spring manufacturer will introduce you to the floor spring adjustment method.

1. The reason for the too loose floor spring is mostly due to oil leakage of the shaft and weakened elasticity. The shaft connection between the sky shaft and the main shaft of the floor spring is not strictly perpendicular to the ground, and the movement of the door leaf will bring greater torsion to the floor spring. The wear between the main spindle and the bearing causes oil leakage from the shaft. The spring will inevitably weaken its elasticity after a long-term stretching exercise. This situation can only be corrected by changing the spring.

2. If it is not the case of shaft oil leakage and weakened elasticity, it can be solved by adjusting the 1st speed and 2nd speed regulating valve, which is just the opposite of the principle of loosening the ground spring.

Before adjustment, you need to prepare a fork wrench and a screwdriver. If the main core of the floor spring cannot be returned due to a long service life, the main core of the floor spring should be replaced, and you can only find the master to replace it.


Send Inquiry