< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=731069931498933&ev=PageView&noscript=1"/>
banner

OUR News

Home > News

Application And Function Of Fire Door Closer

Oct 21, 2021

The application of fire door closers must focus on the following points:

1. Pay attention to the damping buffer function: adjust the door closer independently according to the damping buffer force and range and application standards.

2. Pay attention to the delay and slow door closing: the door starts to close at a slower average speed from a large part of the door opening and closing, and it is necessary to make stepless adjustments according to the standard.

3. Need to pay attention to adjusting the closing force: it can be applied to installation on doors with a wide range of door weight and door width, and in public places where the friction resistance of closing the door is very large due to the natural environment.

4. Pay attention to the application of the natural environment: fire safety and fire protection standards and cold and frost protection requirements in public places at minus 35° in winter. Generally, the selection of door closers can be based on the manufacturer’s product specifications, according to different power sizes or Adjust the strength to match the size and total weight of different doors.

The door closer is a hydraulic device similar to a spring plate on the door head. When the door is opened, it can be released after compression to automatically close the door. It has the function of a spring door magnetic lock, not a door lock. Fire door closers have been used by different types of doors in many places, and they have been selected as a key safety protection function for users. The regulations also require fire doors to be equipped with a self-locking device on the door. It is important to know that a fire door should remain closed. At the same time a very simple door to avoid accidental one that will cause the fire to spread. They all have clear marks to make it obvious which one to use when selected. At the same time this is a very simple door fixation. All fire door closers should be closely adapted to the 5mm maximum gap structure. Under different conditions, there is a clear tendency to support their opening and surrounding fire extinguishers, or wedges. And all fire doors are guaranteed to be equipped with expansion seals for frictional resistance of 30 minutes or more. The fire door must be equipped with effective automatic closing of the thermal expansion of the machine and equipment, this kind of seal seals the gap between the door and the frame.

For fire door closers, a minimum size of 3 is necessary. Also keep in mind that a higher size of the door closer may require considerable air pressure if possible. This kind of smart machinery and equipment actually presses the opening and closing door until it is triggered to close, and it is connected to an electromagnet by the fire alarm system or sensory machinery and equipment. The door is close to the frame and does not allow other resistance to lock or lock ability. When it feels the alarm, it releases the door


Send Inquiry